| SA1500 Powered
Subwoofer
 The Sigma Series SA1500 subwoofer has evolved from our previous models in the range to give you optimum performance. The Subwoofer cabinet is made from Medium Density Fibreboard and is braced inside to stop vibration and handle the strain of low frequencies.
The SA1500 is fitted with a range of controls.
Volume, this is set to a level and then controlled by your receiver. Crossover, this is set to match your front speaker cut off frequency. Phase, is the direction the driver moves when operating, in phase or out of phase. With this control you can place the subwoofer anywhere in the room. Standby, controls the on and off power to the subwoofer. With the standy in the On position will shut down the subwoofer when the receiver is turned off.
The SA1500 subwoofer amplifier will deliver 150 watts of real power to the 150mm driver. We have a subwoofer input and output. If you need more bass you can link up another subwoofer from the out of this subwoofer to the second subwoofer.
|
SPECIFICATIONS
|
Power
Watts
|
Frequency
Response
|
Bass
Driver
|
Rated Impedance
|
Tweeter
|
Dimensions
HxWxD9(mm)
|
Weight
(kgs)
|
|
SA1500
|
150 RMS
|
35-180 Hz
|
1x250
mm
|
----------
|
----------
|
440x320x392
|
14
|
ES30
Powered
250 Watt Subwoofer
 Building
a subwoofer that runs with satellite speakers requires a great deal of
research. The ES30 has been designed to take over where the satellites
finish. You get a great transition as the sub fills in the lower and upper
bass.
The controls are Volume;
this control is set and then your receiver has a subwoofer level that can
be adjusted to increase or decrease the volume. Phase, this control lets
you place the subwoofer anywhere in the room to fill the room with bass.
Crossover; this control increases or decreases the top end of the lower
frequency to fill in where the satellite speakers finish and a new control
called Bass Extension; this control will give you up to 6db gain at the
frequency you set the crossover control. We also have a separate standby
switch so you can have the sub on auto or manual on and off.
With 250 watts of pure power
this subwoofer will make the experience real.
The ES30 subwoofer
is available in Black Piano Gloss finish.
CLICK
ON THE PICTURE TO SEE A LARGER, MORE DETAILED IMAGE
|
SPECIFICATIONS
|
Power
Watts
|
Frequency
Response
|
Bass
Driver
|
Input
|
Output
|
Volume
Control
|
Frequency
Control
|
Phase
Control
|
Dimensions
HxWxD9(mm)
|
Weight
(kgs)
|
Recommended
Retail Price (AU$)
|
|
ES30
|
250 RMS
|
25-200 Hz
|
1x250
mm
|
Low Level
RCA Socket
|
Low Level
RCA Socket
|
Variable
0~10
|
Variable
35~180Hz
|
Variable
0~180 Degrees
|
360x310x400
|
19.5
|
$799 ea
|
...
SA1416
Powered
150 Watt Subwoofer
 The
SA1416 powered subwoofer adds low frequency effects that are sent to
the subwoofer in a separate channel from a digital 5.1 channel source.
Using CD, FM or video signals the receiver sends low frequency set by your
receivers low frequency signal to the subwoofer. It has its own 150 watt
amplifier built in. There are controls for volume, crossover, frequency
and phase.
The sub also has a power
switch, a separate standby switch to run in auto on mode. This enables
you to turn to standby so the sub will turn off when you are not using
the system or set the standby switch off to keep the subwoofer on in low
passages of movies or music.
The SA1416 is available in
black finish.
CLICK
ON THE PICTURE TO SEE A LARGER, MORE DETAILED IMAGE |
